d |
Bore diameter |
45 mm |
D |
Outside diameter |
100 mm |
B |
Width |
39,7 mm |
Cr |
Basic dynamic load rating, radial |
72.000 N |
C0r |
Basic static load rating, radial |
54.000 N |
Cur |
Fatigue load limit, radial |
3.700 N |
nG |
Limiting speed |
5.500 1/min |
nϑr |
Reference speed |
6.700 1/min |
≈m |
Weight |
1,33 kg |
da min |
Minimum diameter shaft shoulder |
54 mm |
Da max |
Maximum diameter of housing shoulder |
91 mm |
ra max |
Maximum fillet radius |
1,5 mm |
rmin |
Minimum chamfer dimension |
1,5 mm |
D2 |
Caliber diameter outer ring |
87,3 mm |
d2 |
Caliber diamter inner ring |
63,3 mm |
a |
Distance between the apexes of the pressure cones |
57,8 mm |
α |
Contact angle |
30 ° |
Tmin |
Operating temperature min. |
-20 °C |
Tmax |
Operating temperature max. |
120 °C |
Lubricant |
Standard ball bearing and insert bearing grease for D>62mm |
GA13 |
Sealing |
Non-contact Shield on both sides |
2Z |
Cage |
solid cage made of glass-fiber reinforced polyamid PA66 |
TVH |
Tolerance class |
Class6 (P6), better than PN |
P6 |
Axial internal clearance |
Group N (CN) |
CN |
Dimensional / heat stabilization |
Rings dimensional stabilized up to 150° |
S0 |
Design variant |
Design variant BD |
BD |