d |
Bore diameter |
17 mm |
D |
Outside diameter |
30 mm |
B |
Width |
10 mm |
Cr |
Basic dynamic load rating, radial |
5.200 N |
C0r |
Basic static load rating, radial |
4.100 N |
Cur |
Fatigue load limit, radial |
207 N |
nG |
Limiting speed |
13.400 1/min |
≈m |
Weight |
0,026 kg |
da min |
Minimum diameter shaft shoulder |
19 mm |
Da max |
Maximum diameter of housing shoulder |
28 mm |
ra max |
Maximum fillet radius |
0,3 mm |
rmin |
Minimum chamfer dimension |
0,3 mm |
D2 |
Caliber diameter outer ring |
27,95 mm |
d2 |
Caliber diamter inner ring |
20 mm |
a |
Distance between the apexes of the pressure cones |
14,916 mm |
α |
Contact angle |
25 ° |
Tmin |
Operating temperature min. |
-20 °C |
Tmax |
Operating temperature max. |
100 °C |
Lubricant |
ball bearing grease, low noise for D<=62mm |
GA14 |
Sealing |
Contact seal on both sides |
2RSR |
Cage |
solid cage made of glass-fiber reinforced polyamid PA66 |
TVH |
Tolerance class |
Normal (PN) |
PN |
Axial internal clearance |
Group N (CN) |
CN |
Dimensional / heat stabilization |
Rings dimensional stabilized up to 120° |
SN |
Design variant |
Design variant B |
B |