Product details from catalogue Inquiry

Drawings:

HC7203-B-XL-2RS-TVP FAG


d Bore diameter 17 mm
D Outside diameter 40 mm
B Width 12 mm
Cr Basic dynamic load rating, radial 10.500 N
C0r Basic static load rating, radial 5.400 N
Cur Fatigue load limit, radial 285 N
nG Limiting speed 11.100 1/min
≈m Weight 0,059 kg
da min Minimum diameter of shaft shoulder 21,2 mm
Da max Maximum diameter of housing shoulder 35,8 mm
Db max Maximum diameter of housing shoulder 37,6 mm
ra max Maximum fillet radius of shaft 0,6 mm
ra1 max Maximum fillet radius of housing 0,6 mm
rmin Minimum chamfer dimension 0,6 mm
r1 min Minimum chamfer dimension 0,3 mm
D1 Shoulder diameter on outer ring wide side face 31,5 mm
D2 Caliber diameter on outer ring wide side face 33,1 mm
D3 Caliber diameter on outer ring small side face 36,3 mm
d1 Shoulder diameter on inner ring wide side face 26 mm
d2 Caliber diameter on inner ring wide side face 22,9 mm
a Distance between the apexes of the pressure cones 18 mm
α Contact angle 40 °
Tmin Operating temperature min. -20 °C
Tmax Operating temperature max. 100 °C
Design variant Design variant B B
Sealing Contact seal on both sides 2RS
Cage solid cage made of glass-fiber reinforced polyamid PA66, ball guided TVP
Tolerance class Class6 (P6), better than PN P6
Lubricant ball bearing grease, low noise for D<=62mm GA14
Dimensional / heat stabilization Rings dimensional stabilized up to 150° S0