Product number:

7200-B-XL-2RS-TVP-UL

Brand:

Product name:

bearing

Sizes:

10X30X9

Inquiry Subscribe

7200-B-XL-2RS-TVP-UL FAG

d	Bore diameter	10 mm
D	Outside diameter	30 mm
B	Width	9 mm
Cr	Basic dynamic load rating, radial	5.600 N
C0r	Basic static load rating, radial	2.600 N
Cur	Fatigue load limit, radial	179 N
nG	Limiting speed	16.100 1/min
≈m	Weight	0,033 kg
da min	Minimum diameter of shaft shoulder	14,2 mm
Da max	Maximum diameter of housing shoulder	25,8 mm
Db max	Maximum diameter of housing shoulder	27,6 mm
ra max	Maximum fillet radius of shaft	0,6 mm
ra1 max	Maximum fillet radius of housing	0,3 mm
rmin	Minimum chamfer dimension	0,6 mm
r1 min	Minimum chamfer dimension	0,3 mm
D1	Shoulder diameter on outer ring wide side face	22 mm
D2	Caliber diameter on outer ring wide side face	23,2 mm
D3	Caliber diameter on outer ring small side face	25,4 mm
d1	Shoulder diameter on inner ring wide side face	18,3 mm
d2	Caliber diameter on inner ring wide side face	15,5 mm
a	Distance between the apexes of the pressure cones	13 mm
α	Contact angle	40 °
Tmin	Operating temperature min.	-20 °C
Tmax	Operating temperature max.	100 °C
Vmax	Preload per set max.	-2 µm
Tol(+)	Tolerance for axial clearance or preload per set	8 µm
FV max	Preload force	38 N
Design variant	Design variant B	B
Sealing	Contact seal on both sides	2RS
Cage	solid cage made of glass-fiber reinforced polyamid PA66, ball guided	TVP
Tolerance class	Class6 (P6), better than PN	P6
Bearing with matched conditions for fitting in pairs	bearing set with light preload	UL
Lubricant	ball bearing grease, low noise for D<=62mm	GA14
Dimensional / heat stabilization	Rings dimensional stabilized up to 150°	S0