| d |
Bore diameter |
15 mm |
| D |
Outside diameter |
35 mm |
| B |
Width |
11 mm |
| Cr |
Basic dynamic load rating, radial |
8.900 N |
| C0r |
Basic static load rating, radial |
4.450 N |
| Cur |
Fatigue load limit, radial |
305 N |
| nG |
Limiting speed |
12.800 1/min |
| ≈m |
Weight |
0,046 kg |
| da min |
Minimum diameter of shaft shoulder |
19,2 mm |
| Da max |
Maximum diameter of housing shoulder |
30,8 mm |
| Db max |
Maximum diameter of housing shoulder |
32,6 mm |
| ra max |
Maximum fillet radius of shaft |
0,6 mm |
| ra1 max |
Maximum fillet radius of housing |
0,3 mm |
| rmin |
Minimum chamfer dimension |
0,6 mm |
| r1 min |
Minimum chamfer dimension |
0,3 mm |
| D1 |
Shoulder diameter on outer ring wide side face |
27,6 mm |
| D2 |
Caliber diameter on outer ring wide side face |
29,2 mm |
| D3 |
Caliber diameter on outer ring small side face |
32,1 mm |
| d1 |
Shoulder diameter on inner ring wide side face |
22,8 mm |
| d2 |
Caliber diameter on inner ring wide side face |
19,7 mm |
| a |
Distance between the apexes of the pressure cones |
16 mm |
| α |
Contact angle |
40 ° |
| Tmin |
Operating temperature min. |
-20 °C |
| Tmax |
Operating temperature max. |
100 °C |
| Vmax |
Preload per set max. |
-4 µm |
| Tol(+) |
Tolerance for axial clearance or preload per set |
8 µm |
| FV max |
Preload force |
62 N |
| Design variant |
Design variant B |
B |
| Sealing |
Contact seal on both sides |
2RS |
| Cage |
solid cage made of glass-fiber reinforced polyamid PA66, ball guided |
TVP |
| Tolerance class |
Class6 (P6), better than PN |
P6 |
| Bearing with matched conditions for fitting in pairs |
bearing set with light preload |
UL |
| Lubricant |
ball bearing grease, low noise for D<=62mm |
GA14 |
| Dimensional / heat stabilization |
Rings dimensional stabilized up to 150° |
S0 |
+36704288344
HU
EN
