| d |
Bore diameter |
25 mm |
| D |
Outside diameter |
62 mm |
| B |
Width |
25,4 mm |
| Cr |
Basic dynamic load rating, radial |
31.500 N |
| C0r |
Basic static load rating, radial |
21.000 N |
| Cur |
Fatigue load limit, radial |
1.460 N |
| nG |
Limiting speed |
9.300 1/min |
| ≈m |
Weight |
0,352 kg |
| da min |
Minimum diameter shaft shoulder |
32 mm |
| Da max |
Maximum diameter of housing shoulder |
55 mm |
| ra max |
Maximum fillet radius |
1 mm |
| rmin |
Minimum chamfer dimension |
1,1 mm |
| D2 |
Caliber diameter outer ring |
53,7 mm |
| d2 |
Caliber diamter inner ring |
37,6 mm |
| a |
Distance between the apexes of the pressure cones |
35,4 mm |
| α |
Contact angle |
30 ° |
| Tmin |
Operating temperature min. |
-30 °C |
| Tmax |
Operating temperature max. |
100 °C |
| Lubricant |
Grease (L195/customer specific) |
L195 |
| Sealing |
Contact seal on both sides |
2HRS |
| Cage |
solid cage made of glass-fiber reinforced polyamid PA66 |
TVH |
| Tolerance class |
Class6 (P6), better than PN |
P6 |
| Axial internal clearance |
Special axial internal clearance in µm |
A##-## |
| Dimensional / heat stabilization |
Rings dimensional stabilized up to 120° |
SN |
| Design variant |
Design variant BD |
BD |
+36704288344
HU
EN
