Product number:

7205-B-XL-2RS-TVP-UL

Brand:

Product name:

bearing

Sizes:

25X52X15

Replacements:

7205-B-2RS-TVP-UL

Inquiry Subscribe

7205-B-XL-2RS-TVP-UL FAG

d	Bore diameter	25 mm
D	Outside diameter	52 mm
B	Width	15 mm
Cr	Basic dynamic load rating, radial	16.200 N
C0r	Basic static load rating, radial	9.000 N
Cur	Fatigue load limit, radial	620 N
nG	Limiting speed	8.000 1/min
≈m	Weight	0,127 kg
da min	Minimum diameter of shaft shoulder	30,6 mm
Da max	Maximum diameter of housing shoulder	46,4 mm
Db max	Maximum diameter of housing shoulder	47,8 mm
ra max	Maximum fillet radius of shaft	1 mm
ra1 max	Maximum fillet radius of housing	0,6 mm
rmin	Minimum chamfer dimension	1 mm
r1 min	Minimum chamfer dimension	0,6 mm
D1	Shoulder diameter on outer ring wide side face	42 mm
D2	Caliber diameter on outer ring wide side face	44,1 mm
D3	Caliber diameter on outer ring small side face	48 mm
d1	Shoulder diameter on inner ring wide side face	35,5 mm
d2	Caliber diameter on inner ring wide side face	31,8 mm
a	Distance between the apexes of the pressure cones	24 mm
α	Contact angle	40 °
Tmin	Operating temperature min.	-20 °C
Tmax	Operating temperature max.	100 °C
Vmax	Preload per set max.	-4 µm
Tol(+)	Tolerance for axial clearance or preload per set	8 µm
FV max	Preload force	112 N
Design variant	Design variant B	B
Sealing	Contact seal on both sides	2RS
Cage	solid cage made of glass-fiber reinforced polyamid PA66, ball guided	TVP
Tolerance class	Class6 (P6), better than PN	P6
Bearing with matched conditions for fitting in pairs	bearing set with light preload	UL
Lubricant	ball bearing grease, low noise for D<=62mm	GA14
Dimensional / heat stabilization	Rings dimensional stabilized up to 150°	S0