Product number:

7007-B-XL-2RS-TVP-P5-L260-UO

Brand:

Product name:

bearing

Sizes:

35X62X14

Inquiry Subscribe

7007-B-XL-2RS-TVP-P5-L260-UO FAG

d	Bore diameter	35 mm
D	Outside diameter	62 mm
B	Width	14 mm
Cr	Basic dynamic load rating, radial	24.300 N
C0r	Basic static load rating, radial	17.200 N
Cur	Fatigue load limit, radial	1.200 N
nG	Limiting speed	6.000 1/min
≈m	Weight	149 g
da min	Minimum diameter of shaft shoulder	39,6 mm
Da max	Maximum diameter of housing shoulder	57,4 mm
Db max	Maximum diameter of housing shoulder	58,8 mm
ra max	Maximum fillet radius of shaft	1 mm
ra1 max	Maximum fillet radius of housing	0,6 mm
rmin	Minimum chamfer dimension	1 mm
r1 min	Minimum chamfer dimension	0,6 mm
D1	Shoulder diameter on outer ring wide side face	53,4 mm
D2	Caliber diameter on outer ring wide side face	54 mm
D3	Caliber diameter on outer ring small side face	58,9 mm
d1	Shoulder diameter on inner ring wide side face	47 mm
d2	Caliber diameter on inner ring wide side face	43,6 mm
a	Distance between the apexes of the pressure cones	27 mm
α	Contact angle	40 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	100 °C
Amin	Axial clearance per set min.	0 µm
Tol(+)	Tolerance for axial clearance or preload per set	6 µm
Design variant	Design variant B	B
Sealing	Contact seal on both sides	2RS
Cage	solid cage made of glass-fiber reinforced polyamid PA66, ball guided	TVP
Tolerance class	Class5 (P5), better than P6	P5
Bearing with matched conditions for fitting in pairs	bearing set clearance-free in O or X arrangement	UO
Lubricant	Grease (L260/customer specific)	L260
Dimensional / heat stabilization	Rings dimensional stabilized up to 150°	S0