| d |
Bore diameter |
950 mm |
| D |
Outside diameter |
1.150 mm |
| B |
Width |
90 mm |
| Cr |
Basic dynamic load rating, radial |
830.000 N |
| C0r |
Basic static load rating, radial |
2.430.000 N |
| Cur |
Fatigue load limit, radial |
43.000 N |
| nG |
Limiting speed |
740 1/min |
| nϑr |
Reference speed |
360 1/min |
| ≈m |
Weight |
167,94 kg |
| da min |
Minimum diameter of shaft shoulder |
968 mm |
| Da max |
Maximum diameter of housing shoulder |
1.132 mm |
| Db max |
Maximum diameter of housing shoulder |
1.141,2 mm |
| ra max |
Maximum fillet radius of shaft |
4 mm |
| ra1 max |
Maximum fillet radius of housing |
2 mm |
| rmin |
Minimum chamfer dimension |
5 mm |
| r1 min |
Minimum chamfer dimension |
2 mm |
| D1 |
Shoulder diameter on outer ring wide side face |
1.075,5 mm |
| d1 |
Shoulder diameter on inner ring wide side face |
1.020 mm |
| a |
Distance between the apexes of the pressure cones |
348 mm |
| α |
Contact angle |
30 ° |
| Tmin |
Operating temperature min. |
-30 °C |
| Tmax |
Operating temperature max. |
200 °C |
| Vmax |
Preload per set max. |
-38 µm |
| Tol(+) |
Tolerance for axial clearance or preload per set |
26 µm |
| FV max |
Preload force |
19.155 N |
| Design variant |
|
Standard |
| Sealing |
not sealed |
Without |
| Cage |
solid brass cage, inner ring guided |
MPB |
| Tolerance class |
Class5 (P5), better than P6 |
P5 |
| Bearing with matched conditions for fitting in pairs |
bearing set with moderate preload |
UM |
| Lubricant |
Bearing not greased. |
Without |
| Dimensional / heat stabilization |
Rings dimensional stabilized up to 200° |
S1 |
+36704288344
HU
EN
