+36704288344
HU
ENProduct details from catalogue Inquiry
Drawings:
SMR83-2Z FAG
Deep groove ball bearing SMR..-2Z, corrosion-resistant materials, single row, miniature design, shields, steel sheet metal cage
| d | Bore diameter | 3,00 mm |
| D | Outside diameter | 8,00 mm |
| B | Width | 3,00 mm |
| Cr | Basic dynamic load rating, radial | 336,00 N |
| C0r | Basic static load rating, radial | 112,00 N |
| Cur | Fatigue load limit, radial | 3,80 N |
| nG | Limiting speed | 90.000,00 1/min |
| nϑr | Reference speed | 52.000,00 1/min |
| ≈m | Weight | 0,67 g |
| da min | Minimum diameter shaft shoulder | 3,80 mm |
| Da max | Maximum diameter of housing shoulder | 7,20 mm |
| ra max | Maximum fillet radius | 0,10 mm |
| rmin | Minimum chamfer dimension | 0,10 mm |
| D2 | Caliber diameter outer ring | 7,40 mm |
| d1 | Shoulder diameter inner ring | 5,00 mm |
| Tmin | Operating temperature min. | -30,00 °C |
| Tmax | Operating temperature max. | 120,00 °C |
| f0 | Calculation factor | 11,10 |
| Logistical code | - | HLC |
| Material Bearing | Stainless steel | S |
| Sealing | Non-contact Shield on both sides | 2Z |
| Cage | steel sheet metal | JN |
| Tolerance class | Normal (PN) | PN |
| Dimensional / heat stabilization | Rings dimensional stabilized up to 120° | SN |
| Lubricant | Grease (L138/customer specific) | L138 |
| Fill factor | Standard | |
| Radial internal clearance | Group N (CN) | CN |
| Bore type | Cylindrical | Z |