+36704288344
HU
ENProduct details from catalogue Inquiry
Drawings:
S61800-2RSR-HLC FAG
Deep groove ball bearing S618..-2RSR, corrosion-resistant materials, single row, seals, steel sheet metal cage
| d | Bore diameter | 10 mm |
| D | Outside diameter | 19 mm |
| B | Width | 5 mm |
| Cr | Basic dynamic load rating, radial | 1.460 N |
| C0r | Basic static load rating, radial | 672 N |
| Cur | Fatigue load limit, radial | 58 N |
| nG | Limiting speed | 21.000 1/min |
| ≈m | Weight | 5,6 g |
| da min | Minimum diameter shaft shoulder | 12 mm |
| Da max | Maximum diameter of housing shoulder | 17 mm |
| ra max | Maximum fillet radius | 0,3 mm |
| rmin | Minimum chamfer dimension | 0,3 mm |
| D2 | Caliber diameter outer ring | 17,2 mm |
| d1 | Shoulder diameter inner ring | 12,7 mm |
| Tmin | Operating temperature min. | -30 °C |
| Tmax | Operating temperature max. | 100 °C |
| f0 | Calculation factor | 11,9 |
| Logistical code | - | HLC |
| Material Bearing | Stainless steel | S |
| Sealing | Contact seal on both sides | 2RSR |
| Cage | steel sheet metal | JN |
| Tolerance class | Normal (PN) | PN |
| Dimensional / heat stabilization | Rings dimensional stabilized up to 120° | SN |
| Lubricant | Grease (L138/customer specific) | L138 |
| Fill factor | Standard | |
| Radial internal clearance | Group N (CN) | CN |
| Bore type | Cylindrical | Z |