| d |
Bore diameter |
70 mm |
| D |
Outside diameter |
125 mm |
| B |
Width |
24 mm |
| Cr |
Basic dynamic load rating, radial |
118.000 N |
| C0r |
Basic static load rating, radial |
114.000 N |
| Cur |
Fatigue load limit, radial |
8.700 N |
| nG |
Limiting speed |
10.700 1/min |
| nϑr |
Reference speed |
4.700 1/min |
| ≈m |
Weight |
1,31 kg |
| da min |
Minimum diameter shaft shoulder |
79 mm |
| Da max |
Maximum diameter of housing shoulder |
116 mm |
| ra max |
Maximum fillet radius |
1,5 mm |
| rmin |
Minimum chamfer dimension |
1,5 mm |
| D1 |
Shoulder diameter outer ring |
106,3 mm |
| d1 |
Shoulder diameter inner ring |
89,1 mm |
| a |
Distance between the apexes of the pressure cones |
68 mm |
| an |
Hight retaining slot |
6,5 mm |
| bn |
Width retaining slot |
6,5 mm |
| rn |
Radius retaining slot |
0,5 mm |
| α |
Contact angle |
35 ° |
| Tmin |
Operating temperature min. |
-30 °C |
| Tmax |
Operating temperature max. |
150 °C |
| Cage |
solid brass cage, outer ring guided |
MPA |
| Design, bearing outer ring |
two retaining grooves in the outer ring on one side |
N2 |
| Coating |
|
Without |
| Tolerance class |
Normal (PN) |
PN |
| Dimensional / heat stabilization |
Rings dimensional stabilized up to 150° |
S0 |
| Axial internal clearance |
Group 3 (C3), bigger than CN |
C3 |
+36704288344
HU
EN
