HCM7007-C-T-P4S-UL-XL FAG Catalog

High speed spindle bearing HCM70..-C, adjusted, in pairs or sets, contact angle ? = 17°, with ceramic balls, restricted tolerances

d	Bore diameter	35 mm
D	Outside diameter	62 mm
B	Width	14 mm
Cr	Basic dynamic load rating, radial	11.300 N
C0r	Basic static load rating, radial	5.000 N
Cur	Fatigue load limit, radial	405 N
nG Grease	Limiting speed for grease lubrication	42.300 1/min
nG Oil	Limiting speed for oil lubrication	61.900 1/min
≈m	Weight	140,3 g
da	Diameter shaft shoulder	41 mm
da	Diameter shaft shoulder clearance	h12
Da	Shoulder diameter outer ring	56 mm
Da	Shoulder diameter outer ring clearance	H12
ra max	Maximum recess radius	1 mm
ra1 max	Maximum recess radius	0,3 mm
Etk min	Minimum diameter injection pitch	44,7 mm
Etk max	Maximum diameter injection pitch	46,6 mm
Etk1 min	Minimum diameter injection pitch	42,3 mm
Etk1 max	Maximum diameter injection pitch	46,6 mm
a	Distance between the apexes of the pressure cones	14,4 mm
rmin	Minimum chamfer dimension	1 mm
r1 min	Minimum chamfer dimension	0,6 mm
α	Contact angle	17 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	100 °C
FV L	Preload force light	39 N
FV M	Preload force medium	103 N
FV H	Preload force heavy	217 N
KaE L	Lift-off force light	114 N
KaE M	Lift-off force medium	307 N
KaE H	Lift-off force heavy	663 N
ca L	Axial rigidity light	33 N/µm
ca M	Axial rigidity medium	48 N/µm
ca H	Axial rigidity heavy	64 N/µm
Contact angle	Contact angle 17°	C
Lubricant		Without
Sealing		Without
Outer shape		Standard
Cage	Laminated fabric cage	T
Tolerance class	tolerance class P4S, FAG standard better than P4 to DIN 620	P4S
Arrangement bearing set	Single bearing	U
Preload	preload light	L
Changed internal design		Standard