HS71907-C-T-P4S-UL FAG Catalog

Spindle bearings HS719..-C, adjusted, in pairs or sets, contact angle ? = 15°, restricted tolerances

d	Bore diameter	35 mm
D	Outside diameter	55 mm
B	Width	10 mm
Cr	Basic dynamic load rating, radial	6.400 N
C0r	Basic static load rating, radial	3.800 N
Cur	Fatigue load limit, radial	400 N
nG Grease	Limiting speed for grease lubrication	36.000 1/min
nG Oil	Limiting speed for oil lubrication	56.000 1/min
≈m	Weight	76,08 g
da	Diameter shaft shoulder	40 mm
da	Diameter shaft shoulder clearance	h12
Da	Shoulder diameter outer ring	51,5 mm
Da	Shoulder diameter outer ring clearance	H12
ra max	Maximum recess radius	0,6 mm
ra1 max	Maximum recess radius	0,15 mm
Etk min	Minimum diameter injection pitch	42,6 mm
Etk max	Maximum diameter injection pitch	43,4 mm
Etk1 min	Minimum diameter injection pitch	41,2 mm
Etk1 max	Maximum diameter injection pitch	43,4 mm
a	Distance between the apexes of the pressure cones	11 mm
rmin	Minimum chamfer dimension	0,6 mm
r1 min	Minimum chamfer dimension	0,6 mm
α	Contact angle	15 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	100 °C
FV L	Preload force light	23 N
FV M	Preload force medium	70 N
FV H	Preload force heavy	140 N
KaE L	Lift-off force light	70 N
KaE M	Lift-off force medium	220 N
KaE H	Lift-off force heavy	459 N
ca L	Axial rigidity light	24,5 N/µm
ca M	Axial rigidity medium	38,6 N/µm
ca H	Axial rigidity heavy	53 N/µm
Contact angle	Contact angle 15°	C
Sealing		Without
Outer shape		Standard
Cage	Laminated fabric cage	T
Tolerance class	tolerance class P4S, FAG standard better than P4 to DIN 620	P4S
Arrangement bearing set	Single bearing	U
Preload	preload light	L