Product details from catalogue Inquiry

Drawings:

VCM7013-E-T-P4S-UL-XL FAG

High speed spindle bearings VCM70..-E, adjusted, in pairs or sets, contact angle ? = 25°, with ceramic balls, rings made from Vacrodur, restricted tolerances


d Bore diameter 65 mm
D Outside diameter 100 mm
B Width 18 mm
Cr Basic dynamic load rating, radial 46.000 N
C0r Basic static load rating, radial 15.500 N
Cur Fatigue load limit, radial 790 N
nG Grease Limiting speed for grease lubrication 24.300 1/min
nG Oil Limiting speed for oil lubrication 36.400 1/min
≈m Weight 416,64 g
da Diameter shaft shoulder 72 mm
da Diameter shaft shoulder clearance h12
Da Shoulder diameter outer ring 93 mm
Da Shoulder diameter outer ring clearance H12
ra max Maximum recess radius 1 mm
ra1 max Maximum recess radius 0,6 mm
Etk min Minimum diameter injection pitch 77,7 mm
Etk max Maximum diameter injection pitch 80 mm
Etk1 min Minimum diameter injection pitch 74,7 mm
Etk1 max Maximum diameter injection pitch 80 mm
a Distance between the apexes of the pressure cones 28,2 mm
rmin Minimum chamfer dimension 1,1 mm
r1 min Minimum chamfer dimension 0,6 mm
α Contact angle 25 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 100 °C
FV L Preload force light 116 N
FV M Preload force medium 304 N
FV H Preload force heavy 632 N
KaE L Lift-off force light 333 N
KaE M Lift-off force medium 879 N
KaE H Lift-off force heavy 1.849 N
ca L Axial rigidity light 120 N/µm
ca M Axial rigidity medium 168 N/µm
ca H Axial rigidity heavy 218 N/µm
Contact angle Contact angle 25° E
Lubricant Without
Sealing Without
Outer shape Standard
Cage Laminated fabric cage T
Tolerance class tolerance class P4S, FAG standard better than P4 to DIN 620 P4S
Arrangement bearing set Single bearing U
Preload preload light L
Changed internal design Standard