HCB71914-E-T-P4S-UL FAG Catalog

Spindle bearings HCB719..-E, adjusted, in pairs or sets, contact angle ? = 25°, with ceramic balls, restricted tolerances

Replacements: HCB71914E.T.P4S.UL

d	Bore diameter	70 mm
D	Outside diameter	100 mm
B	Width	16 mm
Cr	Basic dynamic load rating, radial	32.500 N
C0r	Basic static load rating, radial	20.800 N
Cur	Fatigue load limit, radial	1.680 N
nG Grease	Limiting speed for grease lubrication	17.000 1/min
nG Oil	Limiting speed for oil lubrication	26.000 1/min
≈m	Weight	300 g
da	Diameter shaft shoulder	76 mm
da	Diameter shaft shoulder clearance	h12
Da	Shoulder diameter outer ring	94,5 mm
Da	Shoulder diameter outer ring clearance	H12
ra max	Maximum recess radius	0,6 mm
ra1 max	Maximum recess radius	0,3 mm
Etk min	Minimum diameter injection pitch	79,3 mm
Etk max	Maximum diameter injection pitch	82,2 mm
Etk1 min	Minimum diameter injection pitch	79,3 mm
Etk1 max	Maximum diameter injection pitch	82,2 mm
a	Distance between the apexes of the pressure cones	27,8 mm
rmin	Minimum chamfer dimension	1 mm
r1 min	Minimum chamfer dimension	1 mm
α	Contact angle	25 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	100 °C
FV L	Preload force light	98 N
FV M	Preload force medium	459 N
FV H	Preload force heavy	1.040 N
KaE L	Lift-off force light	281 N
KaE M	Lift-off force medium	1.343 N
KaE H	Lift-off force heavy	3.118 N
ca L	Axial rigidity light	126 N/µm
ca M	Axial rigidity medium	218 N/µm
ca H	Axial rigidity heavy	298 N/µm
Contact angle	Contact angle 25°	E
Sealing		Without
Outer shape		Standard
Cage	Laminated fabric cage	T
Tolerance class	tolerance class P4S, FAG standard better than P4 to DIN 620	P4S
Arrangement bearing set	Single bearing	U
Preload	preload light	L