Product details from catalogue Inquiry

Drawings:

HS7016-E-T-P4S-UL FAG

Spindle bearings HS70..-E, adjusted, in pairs or sets, contact angle ? = 25°, restricted tolerances


d Bore diameter 80 mm
D Outside diameter 125 mm
B Width 22 mm
Cr Basic dynamic load rating, radial 28.500 N
C0r Basic static load rating, radial 20.600 N
Cur Fatigue load limit, radial 2.160 N
nG Grease Limiting speed for grease lubrication 14.000 1/min
nG Oil Limiting speed for oil lubrication 22.000 1/min
≈m Weight 0,886 kg
da Diameter shaft shoulder 88 mm
da Diameter shaft shoulder clearance h12
Da Shoulder diameter outer ring 117 mm
Da Shoulder diameter outer ring clearance H12
ra max Maximum recess radius 1 mm
ra1 max Maximum recess radius 0,6 mm
Etk min Minimum diameter injection pitch 97,3 mm
Etk max Maximum diameter injection pitch 99,7 mm
Etk1 min Minimum diameter injection pitch 94 mm
Etk1 max Maximum diameter injection pitch 99,7 mm
a Distance between the apexes of the pressure cones 34,9 mm
rmin Minimum chamfer dimension 1,1 mm
r1 min Minimum chamfer dimension 1,1 mm
α Contact angle 25 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 100 °C
FV L Preload force light 173 N
FV M Preload force medium 518 N
FV H Preload force heavy 1.035 N
KaE L Lift-off force light 497 N
KaE M Lift-off force medium 1.521 N
KaE H Lift-off force heavy 3.103 N
ca L Axial rigidity light 148 N/µm
ca M Axial rigidity medium 220 N/µm
ca H Axial rigidity heavy 286 N/µm
Contact angle Contact angle 25° E
Sealing Without
Outer shape Standard
Cage Laminated fabric cage T
Tolerance class tolerance class P4S, FAG standard better than P4 to DIN 620 P4S
Arrangement bearing set Single bearing U
Preload preload light L