Product details from catalogue Inquiry

Drawings:

HS7017-C-T-P4S-UL FAG

Spindle bearings HS70..-C, adjusted, in pairs or sets, contact angle ? = 15°, restricted tolerances


d Bore diameter 85 mm
D Outside diameter 130 mm
B Width 22 mm
Cr Basic dynamic load rating, radial 30.500 N
C0r Basic static load rating, radial 22.700 N
Cur Fatigue load limit, radial 2.320 N
nG Grease Limiting speed for grease lubrication 15.000 1/min
nG Oil Limiting speed for oil lubrication 22.000 1/min
≈m Weight 0,837 kg
da Diameter shaft shoulder 93 mm
da Diameter shaft shoulder clearance h12
Da Shoulder diameter outer ring 122 mm
Da Shoulder diameter outer ring clearance H12
ra max Maximum recess radius 1 mm
ra1 max Maximum recess radius 0,6 mm
Etk min Minimum diameter injection pitch 102,3 mm
Etk max Maximum diameter injection pitch 104,7 mm
Etk1 min Minimum diameter injection pitch 99 mm
Etk1 max Maximum diameter injection pitch 104,7 mm
a Distance between the apexes of the pressure cones 25,4 mm
rmin Minimum chamfer dimension 1,1 mm
r1 min Minimum chamfer dimension 1,1 mm
α Contact angle 15 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 100 °C
FV L Preload force light 107 N
FV M Preload force medium 322 N
FV H Preload force heavy 643 N
KaE L Lift-off force light 320 N
KaE M Lift-off force medium 1.006 N
KaE H Lift-off force heavy 2.093 N
ca L Axial rigidity light 60,3 N/µm
ca M Axial rigidity medium 94,4 N/µm
ca H Axial rigidity heavy 129 N/µm
Contact angle Contact angle 15° C
Sealing Without
Outer shape Standard
Cage Laminated fabric cage T
Tolerance class tolerance class P4S, FAG standard better than P4 to DIN 620 P4S
Arrangement bearing set Single bearing U
Preload preload light L