HS71917-C-T-P4S-UL FAG Catalog

Spindle bearings HS719..-C, adjusted, in pairs or sets, contact angle ? = 15°, restricted tolerances

d	Bore diameter	85 mm
D	Outside diameter	120 mm
B	Width	18 mm
Cr	Basic dynamic load rating, radial	21.200 N
C0r	Basic static load rating, radial	17.000 N
Cur	Fatigue load limit, radial	1.770 N
nG Grease	Limiting speed for grease lubrication	15.000 1/min
nG Oil	Limiting speed for oil lubrication	24.000 1/min
≈m	Weight	0,6 kg
da	Diameter shaft shoulder	92 mm
da	Diameter shaft shoulder clearance	h12
Da	Shoulder diameter outer ring	114 mm
Da	Shoulder diameter outer ring clearance	H12
ra max	Maximum recess radius	0,6 mm
ra1 max	Maximum recess radius	0,6 mm
Etk min	Minimum diameter injection pitch	98,5 mm
Etk max	Maximum diameter injection pitch	99,9 mm
Etk1 min	Minimum diameter injection pitch	96 mm
Etk1 max	Maximum diameter injection pitch	99,9 mm
a	Distance between the apexes of the pressure cones	22,7 mm
rmin	Minimum chamfer dimension	1,1 mm
r1 min	Minimum chamfer dimension	1,1 mm
α	Contact angle	15 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	100 °C
FV L	Preload force light	74 N
FV M	Preload force medium	221 N
FV H	Preload force heavy	442 N
KaE L	Lift-off force light	220 N
KaE M	Lift-off force medium	689 N
KaE H	Lift-off force heavy	1.433 N
ca L	Axial rigidity light	55,9 N/µm
ca M	Axial rigidity medium	87,4 N/µm
ca H	Axial rigidity heavy	119 N/µm
Contact angle	Contact angle 15°	C
Sealing		Without
Outer shape		Standard
Cage	Laminated fabric cage	T
Tolerance class	tolerance class P4S, FAG standard better than P4 to DIN 620	P4S
Arrangement bearing set	Single bearing	U
Preload	preload light	L