Product details from catalogue Inquiry

Drawings:

HCS71919-E-T-P4S-UL FAG

Spindle bearings HCS719..-E, adjusted, in pairs or sets, contact angle ? = 25°, with ceramic balls, lip seals on both sides, non-contact, restricted tolerances


d Bore diameter 95 mm
D Outside diameter 130 mm
B Width 18 mm
Cr Basic dynamic load rating, radial 22.500 N
C0r Basic static load rating, radial 17.900 N
Cur Fatigue load limit, radial 1.360 N
nG Grease Limiting speed for grease lubrication 16.000 1/min
≈m Weight 0,651 kg
da Diameter shaft shoulder 102 mm
da Diameter shaft shoulder clearance h12
Da Shoulder diameter outer ring 124 mm
Da Shoulder diameter outer ring clearance H12
ra max Maximum recess radius 0,6 mm
ra1 max Maximum recess radius 0,6 mm
a Distance between the apexes of the pressure cones 35,2 mm
rmin Minimum chamfer dimension 1,1 mm
r1 min Minimum chamfer dimension 1,1 mm
α Contact angle 25 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 80 °C
FV L Preload force light 92 N
FV M Preload force medium 276 N
FV H Preload force heavy 552 N
KaE L Lift-off force light 263 N
KaE M Lift-off force medium 801 N
KaE H Lift-off force heavy 1.623 N
ca L Axial rigidity light 150 N/µm
ca M Axial rigidity medium 221 N/µm
ca H Axial rigidity heavy 285 N/µm
Contact angle Contact angle 25° E
Sealing 2RSD 2RSD
Outer shape Standard
Cage Laminated fabric cage T
Tolerance class tolerance class P4S, FAG standard better than P4 to DIN 620 P4S
Arrangement bearing set Single bearing U
Preload preload light L
Changed internal design Standard