Product details from catalogue Inquiry

Drawings:

VCM7020-E-T-P4S-UL-XL FAG

High speed spindle bearings VCM70..-E, adjusted, in pairs or sets, contact angle ? = 25°, with ceramic balls, rings made from Vacrodur, restricted tolerances


d Bore diameter 100 mm
D Outside diameter 150 mm
B Width 24 mm
Cr Basic dynamic load rating, radial 98.000 N
C0r Basic static load rating, radial 41.000 N
Cur Fatigue load limit, radial 1.880 N
nG Grease Limiting speed for grease lubrication 16.000 1/min
nG Oil Limiting speed for oil lubrication 23.500 1/min
≈m Weight 1,23 kg
da Diameter shaft shoulder 110 mm
da Diameter shaft shoulder clearance h12
Da Shoulder diameter outer ring 141 mm
Da Shoulder diameter outer ring clearance H12
ra max Maximum recess radius 1,5 mm
ra1 max Maximum recess radius 0,6 mm
Etk min Minimum diameter injection pitch 118,3 mm
Etk max Maximum diameter injection pitch 121,7 mm
Etk1 min Minimum diameter injection pitch 114,1 mm
Etk1 max Maximum diameter injection pitch 121,7 mm
a Distance between the apexes of the pressure cones 41,1 mm
rmin Minimum chamfer dimension 1,5 mm
r1 min Minimum chamfer dimension 1 mm
α Contact angle 25 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 100 °C
FV L Preload force light 310 N
FV M Preload force medium 812 N
FV H Preload force heavy 1.691 N
KaE L Lift-off force light 889 N
KaE M Lift-off force medium 2.358 N
KaE H Lift-off force heavy 4.982 N
ca L Axial rigidity light 213 N/µm
ca M Axial rigidity medium 300 N/µm
ca H Axial rigidity heavy 393 N/µm
Contact angle Contact angle 25° E
Lubricant Without
Sealing Without
Outer shape Standard
Cage Laminated fabric cage T
Tolerance class tolerance class P4S, FAG standard better than P4 to DIN 620 P4S
Arrangement bearing set Single bearing U
Preload preload light L
Changed internal design Standard