B7034-C-T-P4S-UL FAG Catalog

Spindle bearings B70..-C, adjusted, in pairs or sets, contact angle ? = 15°, restricted tolerances

Replacements: B7034C.T.P4S.UL, B7034C.TPA.P4.UL

d	Bore diameter	170 mm
D	Outside diameter	260 mm
B	Width	42 mm
Cr	Basic dynamic load rating, radial	241.000 N
C0r	Basic static load rating, radial	189.000 N
Cur	Fatigue load limit, radial	13.700 N
nG Grease	Limiting speed for grease lubrication	5.300 1/min
nG Oil	Limiting speed for oil lubrication	8.000 1/min
≈m	Weight	6,41 kg
da	Diameter shaft shoulder	185 mm
da	Diameter shaft shoulder clearance	h12
Da	Shoulder diameter outer ring	246 mm
Da	Shoulder diameter outer ring clearance	H12
ra max	Maximum recess radius	2,1 mm
ra1 max	Maximum recess radius	1 mm
Etk min	Minimum diameter injection pitch	195,9 mm
Etk max	Maximum diameter injection pitch	206,9 mm
Etk1 min	Minimum diameter injection pitch	195,9 mm
Etk1 max	Maximum diameter injection pitch	206,9 mm
a	Distance between the apexes of the pressure cones	49,8 mm
rmin	Minimum chamfer dimension	2,1 mm
r1 min	Minimum chamfer dimension	2,1 mm
α	Contact angle	15 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	100 °C
FV L	Preload force light	1.448 N
FV M	Preload force medium	4.488 N
FV H	Preload force heavy	8.919 N
KaE L	Lift-off force light	4.439 N
KaE M	Lift-off force medium	14.768 N
KaE H	Lift-off force heavy	31.222 N
ca L	Axial rigidity light	171 N/µm
ca M	Axial rigidity medium	282 N/µm
ca H	Axial rigidity heavy	397 N/µm
Contact angle	Contact angle 15°	C
Lubricant		Without
Sealing		Without
Outer shape		Standard
Cage	Laminated fabric cage	T
Tolerance class	tolerance class P4S, FAG standard better than P4 to DIN 620	P4S
Arrangement bearing set	Single bearing	U
Preload	preload light	L