EGW28-E50 INA Catalog

Thrust washer, low-maintenance, material in accordance with ISO 3547-4, with steel backing

Di	Inner diameter	28 mm
s3	Wall thickness	1,5 mm
Ca	Basic dynamic load rating, axial	83.600 N
C0a	Basic static load rating, axial	167.000 N
≈m	Weight	9,9 g
J	Pitch circle	38 mm
d1	Fixing hole diameter	4 mm
ta	Mounting dimension	1 mm
d6a	Mounting dimension d_6a	48 mm
Di OT	Inner diameter, upper tolerance	0,25 mm
Di UT	Inner diameter, lower tolerance	0 mm
Do	Outer Diameter	48 mm
Do OT	Outside diameter, upper tolerance	0 mm
Do UT	Outside diameter, lower tolerance	-0,25 mm
s3 OT	Wall thickness, upper tolerance	0 mm
s3 UT	Wall thickness, lower tolerance	-0,05 mm
JOT	Pitch circle, upper tolerance	0,12 mm
JUT	Pitch circle, lower tolerance	0,12 mm
d1 OT	Fixing hole diameter, upper tolerance	0,4 mm
d1 UT	Fixing hole diameter, lower tolerance	0,1 mm
ta OT	Mounting dimension, upper tolerance	0,2 mm
ta UT	Mounting dimension, lower tolerance	0,2 mm
d6a OT	Mounting dimension d_6a, upper tolerance	0,12 mm
d6a UT	Mounting dimension d_6a, lower tolerance	0,12 mm
Tmin	Operating temperature min.	-40 °C
Tmax	Operating temperature max.	110 °C
Material sliding Layer	E50	E50
Material back		Steel