Product details from catalogueInquiry

Drawings:

HCB7010-C-T-P4S-UL FAG


d Bore diameter 50 mm
D Outside diameter 80 mm
B Width 16 mm
Cr Basic dynamic load rating, radial 29.000 N
C0r Basic static load rating, radial 15.400 N
Cur Fatigue load limit, radial 1.240 N
nG Grease Limiting speed for grease lubrication 24.000 1/min
nG Oil Limiting speed for oil lubrication 38.000 1/min
≈m Weight 214,41 g
da Diameter shaft shoulder 56 mm
da Diameter shaft shoulder clearance h12
Da Shoulder diameter outer ring 74 mm
Da Shoulder diameter outer ring clearance H12
ra max Maximum recess radius 1 mm
ra1 max Maximum recess radius 0,3 mm
Etk min Minimum diameter injection pitch 59,3 mm
Etk max Maximum diameter injection pitch 62,3 mm
Etk1 min Minimum diameter injection pitch 59,3 mm
Etk1 max Maximum diameter injection pitch 62,3 mm
a Distance between the apexes of the pressure cones 16,7 mm
rmin Minimum chamfer dimension 1 mm
r1 min Minimum chamfer dimension 1 mm
α Contact angle 15 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 100 °C
FV L Preload force light 73 N
FV M Preload force medium 268 N
FV H Preload force heavy 566 N
KaE L Lift-off force light 217 N
KaE M Lift-off force medium 848 N
KaE H Lift-off force heavy 1.894 N
ca L Axial rigidity light 43,9 N/µm
ca M Axial rigidity medium 75,3 N/µm
ca H Axial rigidity heavy 107 N/µm
Contact angle Contact angle 15° C
Sealing Without
Outer shape Standard
Cage Laminated fabric cage T
Tolerance class tolerance class P4S, FAG standard better than P4 to DIN 620 P4S
Arrangement bearing set Single bearing U
Preload preload light L