HSS7003-C-T-P4S-UL FAG Catalog

Spindle bearings HSS70..-C, adjusted, in pairs or sets, contact angle ? = 15°, lip seals on both sides, non-contact, restricted tolerances

d	Bore diameter	17 mm
D	Outside diameter	35 mm
B	Width	10 mm
Cr	Basic dynamic load rating, radial	3.550 N
C0r	Basic static load rating, radial	1.600 N
Cur	Fatigue load limit, radial	170 N
nG Grease	Limiting speed for grease lubrication	63.000 1/min
≈m	Weight	0,046 kg
da	Diameter shaft shoulder	21 mm
da	Diameter shaft shoulder clearance	h12
Da	Shoulder diameter outer ring	32 mm
Da	Shoulder diameter outer ring clearance	H12
ra max	Maximum recess radius	0,3 mm
ra1 max	Maximum recess radius	0,1 mm
a	Distance between the apexes of the pressure cones	8,5 mm
rmin	Minimum chamfer dimension	0,3 mm
r1 min	Minimum chamfer dimension	0,3 mm
α	Contact angle	15 °
Tmin	Operating temperature min.	-30 °C
Tmax	Operating temperature max.	80 °C
FV L	Preload force light	13 N
FV M	Preload force medium	38 N
FV H	Preload force heavy	76 N
KaE L	Lift-off force light	38 N
KaE M	Lift-off force medium	121 N
KaE H	Lift-off force heavy	253 N
ca L	Axial rigidity light	14,3 N/µm
ca M	Axial rigidity medium	22,7 N/µm
ca H	Axial rigidity heavy	31,3 N/µm
Contact angle	Contact angle 15°	C
Sealing	Contact lip seal on both sides	2RSD
Outer shape		Standard
Cage	Laminated fabric cage	T
Tolerance class	tolerance class P4S, FAG standard better than P4 to DIN 620	P4S
Arrangement bearing set	Single bearing	U
Preload	preload light	L