Product details from catalogueInquiry

Drawings:

HCM7013-C-2RSD-T-P4S-UL-XL FAG

High speed spindle bearing HCM70..-C, adjusted, in pairs or sets, contact angle ? = 17°, with ceramic balls, lip seals on both sides, non-contact, restricted tolerances


d Bore diameter 65 mm
D Outside diameter 100 mm
B Width 18 mm
Cr Basic dynamic load rating, radial 20.100 N
C0r Basic static load rating, radial 11.600 N
Cur Fatigue load limit, radial 940 N
nG Grease Limiting speed for grease lubrication 24.900 1/min
≈m Weight 422,5 g
da Diameter shaft shoulder 72 mm
da Diameter shaft shoulder clearance h12
Da Shoulder diameter outer ring 93 mm
Da Shoulder diameter outer ring clearance H12
ra max Maximum recess radius 1 mm
ra1 max Maximum recess radius 0,6 mm
a Distance between the apexes of the pressure cones 21,6 mm
rmin Minimum chamfer dimension 1,1 mm
r1 min Minimum chamfer dimension 0,6 mm
α Contact angle 17 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 80 °C
FV L Preload force light 90 N
FV M Preload force medium 237 N
FV H Preload force heavy 498 N
KaE L Lift-off force light 262 N
KaE M Lift-off force medium 707 N
KaE H Lift-off force heavy 1.528 N
ca L Axial rigidity light 59 N/µm
ca M Axial rigidity medium 85 N/µm
ca H Axial rigidity heavy 115 N/µm
Contact angle Contact angle 17° C
Sealing 2RSD 2RSD
Outer shape Standard
Cage Laminated fabric cage T
Tolerance class tolerance class P4S, FAG standard better than P4 to DIN 620 P4S
Arrangement bearing set Single bearing U
Preload preload light L
Changed internal design Standard